Linear Stage
CXS50 - Precision
★
Guide-Linear ball, Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points-contact, and total 4contact points in dual arc-groove to form strong rail constructure.
★
Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★
Material-Stainless Steel, Carbon Steel
★
Model Shown: CXS60-S2PN-CD
- Specifications
- Technical Data
- Image Download
Total of 4 models
| Model | CXS5020-S2PN-ND | CXS5020-F2PN-ND | CXS5030-S2PN-ND | CXS5030-F2PN-ND |
|---|---|---|---|---|
| Inquiry | Add To Inquiry | Add To Inquiry | Add To Inquiry | Add To Inquiry |
| Table Size (mm) | 50x50 | 50x50 | 50x50 | 50x50 |
| Travel Stroke (mm) | 20 | 20 | 30 | 30 |
| Drive Type | Ø8 ball screw, 1mm lead | Ø8 ball screw, 1mm lead | Ø8 ball screw, 1mm lead | Ø8 ball screw, 1mm lead |
| Rail | Linear ball guide | Linear ball guide | Linear ball guide | Linear ball guide |
| Stage Material | Stainless steel | carbon steel | Stainless steel | carbon steel |
| Surface Treatment | Electroless nickel plating | Electroless nickel plating | Electroless nickel plating | Electroless nickel plating |
| Main Unit Weight (Kg) | 0.57 | 0.57 | 0.72 | 0.72 |
| Coupling | FAMCS11.6-5*5 | FAMCS11.6-5*5 | FAMCS11.6-5*5 | FAMCS11.6-5*5 |
| Accuracy Level | Precision type | Precision type | Precision type | Precision type |
| Wiring Method | N: Right exit | N: Right exit | N: Right exit | N: Right exit |
| Resolution(Pulse) (µm) | 2 (Full) / 1 (Half) | 2 (Full) / 1 (Half) | 2 (Full) / 1 (Half) | 2 (Full) / 1 (Half) |
| Max. Speed(Full Step) (mm/sec) | 20 | 20 | 20 | 20 |
| Positioning Precision (µm) | 5 | 5 | 5 | 5 |
| Repeatability Precision(µm) | ±0.5 | ±0.5 | ±0.5 | ±0.5 |
| Multi-point iterative positioning accuracy (µm) | N/A | N/A | N/A | N/A |
| Load Capacity (Kgf) | 6 | 6 | 6 | 6 |
| Missed Step (µm) | 1 | 1 | 1 | 1 |
| Moment Stiffness | N/A | N/A | N/A | N/A |
| Pitch/Yaw | N/A | N/A | N/A | N/A |
| Parallelism (µm) | 20 | 20 | 20 | 20 |
| Dynamic Straightness (µm) | 2 | 2 | 2 | 2 |
| Dynamic Parallelism (µm) | 10 | 10 | 10 | 10 |
| Motor type | 5-phase stepper | 5-phase stepper | 5-phase stepper | 5-phase stepper |
| Motor output shaft type | ☐ 28 Dual-output shaft | ☐ 28 Dual-output shaft | ☐ 28 Dual-output shaft | ☐ 28 Dual-output shaft |
| Motor Brand | Shanyang | Shanyang | Shanyang | Shanyang |
| Motor model | SH5281-7211 | SH5281-7211 | SH5281-7211 | SH5281-7211 |
| Drive brand | Please refer to the motor/drive comparison table. | Please refer to the motor/drive comparison table. | Please refer to the motor/drive comparison table. | Please refer to the motor/drive comparison table. |
| drive model | Please refer to the motor/drive comparison table. | Please refer to the motor/drive comparison table. | Please refer to the motor/drive comparison table. | Please refer to the motor/drive comparison table. |
| Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| Controller Side Connector | 15-pin female connector D-SUB / 12-pin female connector HRS (optional) | 15-pin female connector D-SUB / 12-pin female connector HRS (optional) | 15-pin female connector D-SUB / 12-pin female connector HRS (optional) | 15-pin female connector D-SUB / 12-pin female connector HRS (optional) |
| Origin Sensor | GMT sensor | GMT sensor | GMT sensor | GMT sensor |
| Limit Sensor | GMT sensor | GMT sensor | GMT sensor | GMT sensor |
| Power Voltage | 24V ± 10% | 24V ± 10% | 24V ± 10% | 24V ± 10% |
| Control Output | NPN open collector output under 24V 8mA | NPN open collector output under 24V 8mA | NPN open collector output under 24V 8mA | NPN open collector output under 24V 8mA |
| Output Control | Detection (during sensing): Output transistor OFF (non-conducting) | Detection (during sensing): Output transistor OFF (non-conducting) | Detection (during sensing): Output transistor OFF (non-conducting) | Detection (during sensing): Output transistor OFF (non-conducting) |
Product Overview
System Configuration Diagram
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver.
♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
Axis Definition
GMT has defined different axis as the following figuration according to the movement direction:
Horizontal movement direction is X and Y axis.
Vertical movement direction is Z axis.
Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis.
Green arrows present the specified axis movement direction.
Motor•driver Reference Table
Electrical specifications
Stepper Motor/Driver Specifications Comparison Table
Electric slide table and connecting cable
Introduction to Electromagnetic Brake Stepper Motors
Introduction to Feedback Stepper Motors
Linear sliding table detection method (X, Y axis)
Model
CXS5020-S2PN-CD
CXS5030-S2PN-CD
Model (W/O Motor_D-SUB Connector)
CXS5020-S2PN-XD (☐28)
CXS5020-S2PN-XD-G42 (☐42)
CXS5020-S2PN-XD-P (Servo P.C.D45)
CXS5020-S2PN-XD-M (Servo P.C.D46)
CXS5030-S2PN-XD (☐28)
CXS5030-S2PN-XD-G42 (☐42)
CXS5030-S2PN-XD-P (Servo P.C.D45)
CXS5030-S2PN-XD-M (Servo P.C.D46)
Model (W/O Motor_HRS Connector)
CXS5020-S2PN-XH (☐28)
CXS5020-S2PN-XH-G42 (☐42)
CXS5020-S2PN-XH-P (Servo P.C.D45)
CXS5020-S2PN-XH-M (Servo P.C.D46)
CXS5030-S2PN-XH (☐28)
CXS5030-S2PN-XH-G42 (☐42)
CXS5030-S2PN-XH-P (Servo P.C.D45)
CXS5030-S2PN-XH-M (Servo P.C.D46)
Model (Related Accessory)
CXS60-504 Spacer (☐28)
