Automation Module Series
ARG200 - Hollow Rotary Platform
★ Hollow structure facilitates assembly line setup ★ Easy installation and positioning ★ High rigidity and high load-bearing capacity ★ Travel radius: 360°
- Specifications
- Technical Data
- Image Download
Total of 1 models
| Model | ARG200 |
|---|---|
| Inquiry | Add To Inquiry |
| Base dimensions (mm) | 200 x 250 |
| Table Size (mm) | Ø 195 |
| Hollow dimension (mm) | Ø 100 |
| Travel Itinerary | 360° / No adjustable limit angle travel |
| Drive Type | Gear (reduction ratio 1/10) R10 |
| Rail | Cross roller guide |
| Stage Material/Surface Treatment | Body made of Aluminum Alloy (steel countertop) / Black anodized |
| Torque (N·m) | twenty one |
| Rotational moment of inertia (kg·m2) | 67089 X 10-8 |
| Maximum engine speed (rpm) | 110 |
| Axial load (N) | 5919 |
| Deviation from load (N·m) | 148 |
| Main Unit Weight (Kg) | 7.88 |
| Accuracy Level | P: Precision grade |
| One-way positioning accuracy | 2' (0.034 °) |
| Repeat positioning accuracy | ± 10" (± 0.0028 °) |
| Idling | 4' (0.0667 °) |
| Parallelism (μm) | 30~35 |
| Concentricity of motion (μm) | 15 |
| Dynamic Parallelism (µm) | 15 |
| Servo motor | E90S19 (optional) |
| Servo motor | 750 |
| Servo motor | Installation distance: P.C.D = Ø 90 |
| Servo motor | Applicable shaft diameter Ø 19 |
| Stepper motor | T70S14 (optional) |
| Stepper motor | ☐86 |
| Stepper motor | Installation distance: ☐70 |
| Stepper motor | Applicable shaft diameter Ø 14 |
| sensor | PM-T65 photoelectric sensor (sold separately) |
| Power Voltage | 20V ± 10% |
| Control Output | NPN open collector output below 20V 50mA |
| Output Control | Detection (with and without sensing): When the transistor is OFF, the output (non-conducting) is selectable. |
| Light-shielding sheet metal | Origin sensor block (sold separately) |
| Connector cable including connector | For connecting cables less than 1m in length: CN14A-C1 (sold separately) |
| Connector cable including connector | For cable lengths under 2m: CN14A-C2 (sold separately) |
| Connector cable including connector | For cable lengths under 3m: CN14A-C3 (sold separately) |
| Connector cable including connector | For cable lengths under 5m: CN14A-C5 (sold separately) |
| AC servo motor | 750 W: GSVM-A08LC4 |
| AC servo drive | GSV-KE08MB21CP |
| Stage Side Connector | Manufacturer: TE Connectivity |
| Stage Side Connector | Power line: 172159-1 + 170366-1 (male end) |
| Stage Side Connector | Encoding lines: 172161-1 + 170365-1 (male end) |
| Transmission line side connector | Manufacturer: KST |
| Transmission line side connector | Power cable: E1510-RED (European standard terminal) |
| Transmission line side connector | Manufacturer: JST |
| Transmission line side connector | Encoding cable: PHDR-12VS+SPHD-001T-P0.5 (female end) |
| sensor | PM-T65 photoelectric sensor (sold separately) |
| Power Voltage | 20V ± 10% |
| Control Output | NPN open collector output below 20V 50mA |
| Output Control | Detection (with and without sensing): When the transistor is OFF, the output (non-conducting) is selectable. |
| Light-shielding sheet metal | Origin sensor block (sold separately) |
| Connector cable including connector | For connecting cables less than 1m in length: CN14A-C1 (sold separately) |
| Connector cable including connector | For cable lengths under 2m: CN14A-C2 (sold separately) |
| Connector cable including connector | For cable lengths under 3m: CN14A-C3 (sold separately) |
| Connector cable including connector | For cable lengths under 5m: CN14A-C5 (sold separately) |
Model specifications and recommended servo motors
Model specifications and recommended stepper motor configuration
Recommended installation method/return method comparison
Model (Stepper Motor)
ARG200-A4PX-T70S14
Model (Servo Motor)
ARG200-A4PX-E90S19
