Automation Module Series
ARG100 - Hollow Rotary Platform
★ Hollow structure facilitates assembly line setup ★ Easy installation and positioning ★ High rigidity and high load-bearing capacity ★ Travel radius: 360°
- Specifications
- Technical Data
- Image Download
Total of 1 models
| Model | ARG100 |
|---|---|
| Inquiry | Add To Inquiry |
| Base dimensions (mm) | 100 x 136 |
| Table Size (mm) | Ø 95 |
| Hollow dimension (mm) | Ø 34 |
| Travel Itinerary | 360° / No adjustable limit angle travel |
| Drive Type | Gear (reduction ratio 1/8) R08 |
| Rail | Cross roller guide |
| Stage Material/Surface Treatment | Body made of Aluminum Alloy (steel countertop) / Black anodized |
| Torque (N·m) | twenty one |
| Rotational moment of inertia (kg·m2) | 3048 x 10⁻⁶ |
| Maximum engine speed (rpm) | 200 |
| Axial load (N) | 1560 |
| Deviation from load (N·m) | 39 |
| Main Unit Weight (Kg) | 2.34 |
| Accuracy Level | P: Precision grade |
| One-way positioning accuracy | 2' (0.034 °) |
| Repeat positioning accuracy | ± 10" (± 0.0028 °) |
| Idling | 4' (0.0667 °) |
| Parallelism (μm) | 20~25 |
| Concentricity of motion (μm) | 10 |
| Dynamic Parallelism (µm) | 10 |
| Representation | E70S14 (optional) |
| Reference wattage (W) | 200 & 400 |
| Installation dimensions | Installation distance: P.C.D = Ø 70 |
| Installation dimensions | Applicable shaft diameter Ø 14 |
| Representation | T47S08 (optional) |
| Reference wattage (W) | ☐57 |
| Installation dimensions | Installation distance: ☐47 |
| Installation dimensions | Applicable shaft diameter Ø 8 |
| sensor | PM-T65 photoelectric sensor (sold separately) |
| Power Voltage | 20V ± 10% |
| Control Output | NPN open collector output below 20V 50mA |
| Output Control | Detection (with and without sensing): When the transistor is OFF, the output (non-conducting) is selectable. |
| Light-shielding sheet metal | Origin sensor block (sold separately) |
| Connector cable including connector | For connecting cables less than 1m in length: CN14A-C1 (sold separately) |
| Connector cable including connector | For cable lengths under 2m: CN14A-C2 (sold separately) |
| Connector cable including connector | For cable lengths under 3m: CN14A-C3 (sold separately) |
| Connector cable including connector | For cable lengths under 5m: CN14A-C5 (sold separately) |
| Open-loop driver | ☐57, GDL22G-D |
| Closed-loop driver | N/A |
| Stage Side Connector | 15-pin male connector D-SUB |
| Transmission line side connector | 15-pin female connector D-SUB |
| sensor | PM-T65 photoelectric sensor (sold separately) |
| Power Voltage | 20V ± 10% |
| Control Output | NPN open collector output below 20V 50mA |
| Output Control | Detection (with and without sensing): When the transistor is OFF, the output (non-conducting) is selectable. |
| Light-shielding sheet metal | Origin sensor block (sold separately) |
| Connector cable including connector | For connecting cables less than 1m in length: CN14A-C1 (sold separately) |
| Connector cable including connector | For cable lengths under 2m: CN14A-C2 (sold separately) |
| Connector cable including connector | For cable lengths under 3m: CN14A-C3 (sold separately) |
| Connector cable including connector | For cable lengths under 5m: CN14A-C5 (sold separately) |
| DC servo motor | GSVM-KM02MB-24DP |
| DC servo drive | GSVM-D02MD5 |
| Stage Side Connector | Manufacturer: TE Connectivity |
| Stage Side Connector | Power line: 172159-1 + 170366-1 (male end) |
| Stage Side Connector | Encoding lines: 172161-1 + 170365-1 (male end) |
| Transmission line side connector | Manufacturer: KST |
| Transmission line side connector | Power cable: E1510-RED (European standard terminal) |
| Transmission line side connector | Manufacturer: JST |
| Transmission line side connector | Encoding cable: PHDR-12VS+SPHD-001T-P0.5 (female end) |
| 200 W | GSVM-A02LC4 |
| 400 W | GSV-KE04MB21CP |
| 200 W | GSVM-A04LC4 |
| 400 W | GSV-KE04MB21CP |
| Stage Side Connector | Manufacturer: TE Connectivity |
| Stage Side Connector | Power line: 172159-1 + 170366-1 (male end) |
| Stage Side Connector | Encoding lines: 172161-1 + 170365-1 (male end) |
| Transmission line side connector | Manufacturer: KST |
| Transmission line side connector | Power cable: E1510-RED (European standard terminal) |
| Transmission line side connector | Manufacturer: JST |
| Transmission line side connector | Encoding cable: PHDR-12VS+SPHD-001T-P0.5 (female end) |
| sensor | PM-T65 photoelectric sensor (sold separately) |
| Power Voltage | 20V ± 10% |
| Control Output | NPN open collector output below 20V 50mA |
| Output Control | Detection (with and without sensing): When the transistor is OFF, the output (non-conducting) is selectable. |
| Light-shielding sheet metal | Origin sensor block (sold separately) |
| Connector cable including connector | For connecting cables less than 1m in length: CN14A-C1 (sold separately) |
| Connector cable including connector | For cable lengths under 2m: CN14A-C2 (sold separately) |
| Connector cable including connector | For cable lengths under 3m: CN14A-C3 (sold separately) |
| Connector cable including connector | For cable lengths under 5m: CN14A-C5 (sold separately) |
Model specifications and recommended servo motors
Model specifications and recommended stepper motor configuration
Recommended installation method/return method comparison
Model (Stepper Motor)
ARG100-A4PX-T50S08
Model (Servo Motor)
ARG100-A4PX-E70S14
