Stage table load capacity & rotary stage table inverted use
Stage table load capacity
Answer:
Hello, we recommend the following diagram for the stage table's load-bearing capacity.
Considering only volume factors,
It is recommended that the length and width not exceed 1.5 times the size of the stage table surface, and the height not exceed 1 times the height of the stage table!
Feel free to ask any questions below!
Rotary stage table used upside down
Question:
Hello, our company wants to use GMT rotary stages - MR60-AR and MR85-AR - for inverted hanging applications with a load of 2 kg. Can GMT rotary stages be used for this purpose?
Answer:
Because the upper and lower plates of GMT 's rotary stage are connected by only a few screws, if it is used upside down...
With only a few screws and a small amount of contact surface, the load-bearing capacity can be reduced to less than 30% of the standard load.
Therefore, rotary stages are not suitable for inverted use.
