Gonio Stage
AXG4-VMC - Precision
★
Guide-Crossed-roller Guide, In structure, V-groove and crossed roller acquire movement in high accuracy and capacity by linear transmission to act a high precision movement and load capacity performance.
★
Ball screw,Transmission position: central.
★
Material-Aluminum Alloy.
★
Vibration resistance.
★
Durable.
★
Model Shown: AXG4-40VMC-2PR-CD
- Specifications
- Technical Data
- Image Download
Total of 2 models
| Model | AXG4-40VMC-2PR-CD | AXG4-60VMC-2PR-CD |
|---|---|---|
| Inquiry | Add To Inquiry | Add To Inquiry |
| Table Size (mm) | 40*40 | 40*40 |
| Travel distance (°) | ± 8 | ± 6 |
| Drive Type | ball screw | ball screw |
| Rail | Cross roller guide | Cross roller guide |
| Stage Material/Surface Treatment | Aluminum Alloy / Black Anodized | Aluminum Alloy / Black Anodized |
| Main Unit Weight (Kg) | 0.35 | 0.35 |
| Coupling | FAMMS12-2*5 | FAMMS12-2*5 |
| Accuracy Level | P: Precision type | P: Precision type |
| Wiring Method | R : Right wiring / L : Left wiring | R : Right wiring / L : Left wiring |
| Resolution (pulse) (°) | ≒ 0.00258 (Full) | ≒ 0.00178 (Full) |
| Resolution (pulse) (°) | ≒ 0.00129 (Half) | ≒ 0.00089 (Half) |
| Maximum speed (full-range) (°/sec) | 12.9 | 8.9 |
| Repeat positioning accuracy (°) | ± 0.003 | ± 0.003 |
| Load Capacity (Kgf) | 3 | 3 |
| Idling (°) | < 0.003 | < 0.003 |
| Rotation center height (mm) | 40 ± 0.1 | 60 ± 0.1 |
| Rotation center accuracy (mm) | < 0.01 | < 0.01 |
| Motor Type / Output Shaft Type | 5-phase stepper motor / 28 dual output shafts | 5-phase stepper motor / 28 dual output shafts |
| Motor Brand/Model | SANYO / SH5281-7211 | SANYO / SH5281-7211 |
| Driver brand/model | Please refer to the motor/drive comparison table. | Please refer to the motor/drive comparison table. |
| Connector_Stage side connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
| Connector - Controller Side Connector | 15-pin female connector D-SUB / 12-pin female connector HRS (optional) | 15-pin female connector D-SUB / 12-pin female connector HRS (optional) |
| Sensor_Travel Origin Sensor | GMT sensor | GMT sensor |
| Sensor_Stroke Limit Sensor | GMT sensor | GMT sensor |
| Sensor - Motor Proximity Origin Sensor | N / A | N / A |
| Sensor_Power Voltage | 24V ± 10% | 24V ± 10% |
| Sensor Control Output | NPN open collector output under 24V 8mA | NPN open collector output under 24V 8mA |
| Sensor Output Control | Detection (during sensing): Output transistor OFF (non-conducting) | Detection (during sensing): Output transistor OFF (non-conducting) |
Product Overview
System Configuration Diagram
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver.
♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
Axis Definition
GMT has defined different axis as the following figuration according to the movement direction:
Horizontal movement direction is X and Y axis.
Vertical movement direction is Z axis.
Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis.
Green arrows present the specified axis movement direction.
Motor•driver Reference Table
Electrical specifications
Stepper Motor/Driver Specifications Comparison Table
Electric slide table and connecting cable
Introduction to Electromagnetic Brake Stepper Motors
Introduction to Feedback Stepper Motors
Angle measuring slide table detection method (α axis)
Model
AXG4-40VMC-2PR-CD
AXG4-40VMC-2PL-CD
AXG4-60VMC-2PR-CD
AXG4-60VMC-2PL-CD
