All Categories
    Menu Close


    XX axis manual stage
    Dual axes-XX axis
    Lower axis coarse tuning / Upper axis fine tuning
    Table size : 40x50 (mm)
    ★ Guide- Dovetail type.
    ★ Transmission parts- Rack and pinion+feeding screw.
    ★ Material-Aluminum Alloy
    SKU: MC7G-4050C
    Ship to
    Shipping Method
    Estimated Delivery
    No shipping options


    Model no.MC7G-4050CMC7G-4050F
    Table size (mm)40*5040*50 
    Fine TuningMovement Per Knob Cycle (mm)0.50.25
    Knob Mini. Reading0.01/div.0.005/div.
    Travel Stroke (mm)±17.5±17.5
    Coarse AdjustmentMovement Per Knob Cycle≒18≒18
    Vernier (kg) Finish Minimum Reading0.1 mm/Vernier0.1 mm/Vernier
    Travel Stroke (mm)±30±30 
    Loading (kgf)4
    Weight (kg)0.50.5 


    Characteristic of Different Guiding Type
    Slide WayStructureCharacteristicApplication

    Moving Accuracy

    Load Capacity


    Crossed Roller

    The slide rail consists of two hardened V-grooves with fine ground surface and crossed roller bearings.This is sutable for precise movement device in high accuracy and high capacity, optical instruments in precise gauging and fine tuning, various machine tools, gauging instruments, precise positioning and quantitative movment…etc.ExcellentExcellentExcellent

    Linear Ball

    Slide way and body is in one unit, and Gothic arc-groove ground precisely to meet requirement of high parallism and high flatness. Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points – contact, and total 4 contact points in dual arc-groove to form strong rail construction. In case of rails of SUS-STAGE is to set ball assembly in arc-groove to save traditional adjustment and revision time. In addition, without adjustment screw would save accuracy problem and maintenance time caused by loosen screw, and cheaper as well. Applied to precise positioning device in high accuracy and mid-capacity, product and design integrated system,  optical experiment, precise transportation and fine tuning mechanism application.ExcellentGoodGood
    Dovetail Plane-Pinion and Rack
    (Main material: Brass or aluminum alloy) GMT supplies proper models suitable to be equipped to various modules such as small, coarge or fine turn, larger size for installation etc. Driven-adjustment mode is rack and pinion. Apply to higher working frequency, requirement of faster movement and larger stroke.
    Screw-Driven Plane
    (main material: brass)Prepared by easy-carry standard and slide type fit for inner set mode. Driven adjustment mode is screw shaft mode. Apply to lower frequency, fine tuning environment.
    It is applied to optical instruments and equipments, sampler, detecting device, semi-conductor manufacturing equipment, test machine, microscope, transiting machine, machinig center, medical instrument, printer and others.FairGoodExcellent
    XY Simplified StageRound sticks on two sides are applied to support middle transmission construction:
    Feeding Screw Type
    To move stage table by push-and-press from screws, and to restrain gap produced by using springs tensile force. It’s the type suitable for light loading and accuracy feeding application.
    Threading Type
    The stage table is moved by thread which has been crossed through to the table. The stage is suitable for heavier loading compared to feeding screw with spring transmission type.
    The product is applied to fixture, camera, sensor, nozzle, and guiding groove of the conveyor, those equipments don't require high accuracy adjustment.FairFairFair



    The Main Feeding Mode of Mini Stages
    Main Feeding ModeCharacteristicsA Crcle Movement of Handle RotationApplied for Guiding Device

    Rack and Pinion


    ●Suitable for high speed mass feed.

    ●Not suitable for precise positioning.


    17~20 mm● Dovetail

    Feeding Screw


    ● Use precise threadscrew pitch to proceed simple precise moving.

    0.25~1 mm

    ● Dovetail

    ● Crossed roller

    ●Linear ball bearing

    Micrometer Head

    ● Precise Reading Unit: 0.01mm is suitable for precise tuning. 0.5 mm


    ● Crossed roller

    ● Linear ball bearing

    Rough Slightly Moving Micrometer Head

    ● Divided into rough moving (general feeding) and slight moving (micro feeding) use.

    ● It’s a special feeding  device and a bit costly.

    ● Differential motion structure for slightly transmission. 

    Coarse tuning:0.5 mm

    Fine tuning:0.025mm

    ●Linear ball bearing

    ● Crossed roller



    Feeding Position



    CTRL press and hold the mouse to move, SHIFT press and hold the mouse to zooom in or out. SKU