Please click here to download the application software ⬇️
Update：2022.11.3
Model No.
KE - AC Servo Driver
Specification
Power
Main Loop
Single Phase：190 ~ 240V 50 / 60 Hz
Control Loop
Control Method
Encoder Feedback
250 P / r (10000 Resolution) Relative Encoder
Control Signal
Input
11 Input
Output
Analog Signal
Pulse Signal
4 Input，Parameter decided to use linear drive or high speed photo-coupler input
4 Output
(Linear Drive：3 sets Output；Open-Collector：1 Output)
Communication Function
USB / RS485
1：1 with mini USB Interface
1：32 with RS485 Interface
Regeneration
Built-In 10W Regenerative Resistor
Control Mode
(1) Position Control
(2) Speed Control
(3) Torque Control
(4) Position / Speed Control
(5) Position / Torque Control
(6) Speed / Torque Control
Function
Position
Pulse Input
Linear Driver Indenpendent Interface：2 Mpps
Linear Driver：500 Kpps
Open-Collector：200 Kpps
Analog Input
Used in CW and CCW Independent Torque Limit (3V / Rated Torque)
DIO
Tool Magazine / Indexing
6 bit Position Input，6 bit Status Output，Available to use 59 Positions
Speed
Voltage Ratio is set up by Parameter，Max. Input Voltage ±10V and 6V / Rated Rotational Speed (Default Setup)
Speed Control Range
1：5000
Internal Speed Command
8 steps Speed are set up by Parameter
Slow-Start / Slow-Stop Function
Acceleration and deceleration could be set up individually
0 ~ 10 sec / 1000 rpm，Could set up S-shape acceleration / deceleration
ZERO-SPD
ZERO-SPD Input could set up internal speed to 0
Torque Control
Voltage Ratio is set up by Parameter，Max. Input Voltage ±10V and 3V / 100% Torque (Default Setup)
-01_4.jpeg "GMTGLOBALINC")
