<span style="font-size: 12pt;">★ Guide- Circular linear ball guiding, Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points-contact, and total 4contact points in dual arc-groove to form strong rail constructure.</span> <br /><span style="font-size: 12pt;">★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.</span> <br /><span style="font-size: 12pt;">★ Material-Stainless Steel, Carbon Steel</span> <p><br /><span style="font-size: 12pt;"><span style="color: #e03e2d;"><strong>★</strong></span><span style="color: #e03e2d;"><strong>This product pic. shows as CZLC60-S2PN-CD.</strong></span></span></p>">
★This product pic. shows as CZLC60-S2PN-CD.
Update:2023.10.02
Model No. | CZLC8050-S2PN-CD-P1 CZLC8050-F2PN-CD-P1 | CZLC8050-S2PN-CD-P2 CZLC8050-F2PN-CD-P2 | CZLC8075-S2PN-CD-P1 CZLC8075-F2PN-CD-P1 | CZLC8075-S2PN-CD-P2 CZLC8075-F2PN-CD-P2 | ||
Mechanical Spec. | Table Size (mm) | 80 X 80 | ||||
Travel Stroke (mm) | 50 | 75 | ||||
Drive Type | Ball screw Ø8 lead 1 mm | Ball screw Ø8 lead 2 mm | Ball screw Ø8 lead 1 mm | Ball screw Ø8 lead 2 mm | ||
Rail | Circular Linear Ball Guiding | |||||
Stage Material / Surface Treatment | S:Stainless Steel / Nickel Plating F:Carbon Steel / Nickel Plating | |||||
Main Unit Weight (Kg) | 2.76 | 2.93 | ||||
Coupling | FAMCS11.6-5*5 | |||||
Accuracy Level | P:Precision grade | |||||
Wiring Method | N:GMT Standard | |||||
Precision Spec. | Resolution (Pulse) (µm) | 2 (Full) 1 (Half) | 4 (Full) 2 (Half) | 2 (Full) 1 (Half) | 4 (Full) 2 (Half) | |
Max. Speed (Full Step) (mm / sec) | 20 | 40 | 20 | 40 | ||
Positioning Presion (µm) | 5 | 7 | ||||
Repeatability Precision (µm) | ± 0.5 | |||||
Load Capacity (Kgf) | 11 | |||||
Missed Step (µm) | 1 | |||||
Parallelism (µm) | 20 | |||||
Dynamic Straightness (µm) | 2 | |||||
Dynamic Parallelism (µm) | 10 | |||||
Electrical Spec. | Motor | Type / Shaft Numbers | 5-phase stepper / ☐ 42 double shafts | |||
Brand / Model | SANYO / 103F5510-8211 | |||||
Driver Brand / Model | Please refer to reference table | |||||
Connector | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS | ||||
Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | |||||
Sensor | Origin Sensor | Photoelectric sensor GMT-sensor | ||||
Limit Sensor | ||||||
Origin Approximation Sensor | N / A | |||||
Power Voltage | 24V ± 10% | |||||
Control Output | NPN open collector output under 24V 8mA | |||||
Output Control | Testing (sensing):output transistor OFF (closed) |
System Configuration Diagram |
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs. |
Axis Definition |
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction. |
Motor・driver Reference Table |