<span style="font-size: 12pt;">★ Guide- Circular linear ball guiding, Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points-contact, and total 4contact points in dual arc-groove to form strong rail constructure.</span> <br /><span style="font-size: 12pt;">★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.</span> <br /><span style="font-size: 12pt;">★ Material-Carbon Steel</span> <p><br /><span style="font-size: 12pt;"><span style="color: #e03e2d;"><strong>★</strong></span><span style="color: #e03e2d;"><strong>This product pic. shows as CYN6075-S2NN-ND which is only for reference, please base on below specification for further information.</strong></span></span></p>">
★This product pic. shows as CYN6075-S2NN-ND which is only for reference, please base on below specification for further information.
Update:2023.10.02
Model No. | CYN8030-F2NN-ND-P1 | CYN8030-F2NN-ND-P2 | CYN8050-F2NN-ND-P1 | CYN8050-F2NN-ND-P2 | CYN8075-F2NN-ND-P1 | CYN8075-F2NN-ND-P2 | ||
Mechanical Spec. | Table Size (mm) | 80 X 80 | ||||||
Travel Stroke (mm) | 30 | 50 | 75 | |||||
Drive Type | Ball screw Ø8 lead 1 mm | Ball screw Ø8 lead 2 mm | Ball screw Ø8 lead 1 mm | Ball screw Ø8 lead 2 mm | Ball screw Ø8 lead 1 mm | Ball screw Ø8 lead 2 mm | ||
Rail | Circular Linear Ball Guiding | |||||||
Stage Material / Surface Treatment | Carbon Steel / Nickel Plating | |||||||
Main Unit Weight (Kg) | 3 | 3.36 | 3.68 | |||||
Coupling | FAMCS11.6-5*5 | |||||||
Accuracy Level | N:Standard grade | |||||||
Wiring Method | N:GMT Standard | |||||||
Precision Spec. | Resolution (Pulse) (µm) | 5 (Full) 2.5 (Half) | 10 (Full) 5 (Half) | 5 (Full) 2.5 (Half) | 10 (Full) 5 (Half) | 5 (Full) 2.5 (Half) | 10 (Full) 5 (Half) | |
Max. Speed (Full Step) (mm / sec) | 20 | 40 | 20 | 40 | 20 | 40 | ||
Positioning Presion (µm) | 15 | |||||||
Repeatability Precision (µm) | ± 1 | |||||||
Load Capacity (Kgf) | 14 | |||||||
Missed Step (µm) | 3 | |||||||
Parallelism (µm) | 20 | |||||||
Dynamic Straightness (µm) | 3 | |||||||
Dynamic Parallelism (µm) | 10 | |||||||
Electrical Spec. | Motor | Type / Shaft Numbers | 2-phase stepper / ☐ 28 double shafts | |||||
Brand / Model | GMT / 2MS-N28D32A | |||||||
Driver Brand / Model | GMT / GTR22G-D (Additional options) | |||||||
Connector | Stage Side Connector | 15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS | ||||||
Controller Side Connector | 15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | |||||||
Sensor | Origin Sensor | Photoelectric sensor GMT-sensor | ||||||
Limit Sensor | ||||||||
Origin Approximation Sensor | N / A | |||||||
Power Voltage | 24V ± 10% | |||||||
Control Output | NPN open collector output under 24V 8mA | |||||||
Output Control | Testing (sensing):output transistor OFF (closed) |
System Configuration Diagram |
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs. |
Axis Definition |
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction. |
Motor・driver Reference Table |
|