★This product pic. shows as AXS40-A2NR-DD.
★This product is only selling in China.
Update：2024.02.05
Model No.
AXS80-A2NR-DD
Mechanical Spec.
Table Size (mm)
80 X 80
Travel Stroke (mm)
± 15
Drive Type
Ball screw
Rail
Crossed-roller Guiding
Stage Material / Surface Treatment
Aluminum Alloy / Anodized Matte Black
Accuracy Level
N：Standard grade
Wiring Method
R：Right Wiring / L：Left Wiring
Precision Spec.
Resolution (Pulse) (µm)
5 (Full)
2.5 (Half)
Max. Speed (Full Step) (mm / sec)
12
Positioning Presion (µm)
15
Repeatability Precision (µm)
± 5
Load Capacity (Kgf)
Missed Step (µm)
3
Parallelism (µm)
40
Dynamic Straightness (µm)
Dynamic Parallelism (µm)
Electrical Spec.
Motor
Type / Shaft Numbers
2-phase stepper / ☐ 28 double shafts
Brand / Model
GMT / 2MS-N28D32A
Driver Brand / Model
GMT / GTR22G-D (Additional options)
Connector
Stage Side Connector
15-Pin male end connetor D-SUB
Controller Side Connector
15-Pin female end connetor D-SUB
Sensor
Origin Sensor
Photoelectric sensor EE-SX4134
Limit Sensor
Power Voltage
24V ± 10%
Control Output
NPN open collector output under 24V 8mA
Output Control
Testing (sensing)：output transistor OFF (closed)
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver.
♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
GMT has defined different axis as the following figuration according to the movement direction:
Horizontal movement direction is X and Y axis.
Vertical movement direction is Z axis.
Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis.
Green arrows present the specified axis movement direction.
-01_3.jpeg "GMTGLOBALINC")
