<span style="font-size: 12pt;">X axis manual stage</span> <br /><span style="font-size: 12pt;">Single axis-X axis</span> <br /><span style="font-size: 12pt;">Single slide block、Two slide blocks</span> <br /><span style="font-size: 12pt;">Table size : 50、70、100、150、200、250、300 (mm)</span> <br /><span style="font-size: 12pt;">Travel stroke : ±15~±115 (mm)</span> <br /><span style="font-size: 12pt;">★ Guide- Dovetail type – pinion and rack. It is suitable for higher working frequency, requirement of faster movement and large stroke.</span> <br /><span style="font-size: 12pt;">★ Transmission Parts- Rack and pinion.It is suitable for high speed mass feed.</span> <br /><span style="font-size: 12pt;">★ Material- Aluminum Alloy</span>">
Update:2018.06.21
Model no. | Table size (mm) | Travel stroke (mm) | Minimum | Straightness Accuracy (μm) | Loading (kgf) | Weight |
MC1C-50 | 50 | ±15 | 0.1 mm / | 30 | 3 | 0.12 |
MC1C-70 | 70 | ±25 | 0.1 mm / | 30 | 3 | 0.12 |
MC1C-100 | 100 | ±40 | 0.1 mm / | 30 | 3 | 0.14 |
MC1C-150 | 150 | ±65 | 0.1 mm / | 40 | 3 | 0.17 |
MC1C-150-2 | 150 | ±20 | 0.1 mm / | 40 | 3 | 0.24 |
MC1C-200 | 200 | ±90 | 0.1 mm / | 50 | 3 | 0.21 |
MC1C-200-2 | 200 | ±37 | 0.1 mm / | 50 | 3 | 0.28 |
MC1C-250 | 250 | ±115 | 0.1 mm / | 50 | 3 | 0.36 |
MC1C-300-2 | 300 | ±70 | 0.1 mm / | 70 | 3 | 0.35 |
The Main Feeding Mode of Mini Stages | |||
Main Feeding Mode | Characteristics | A Crcle Movement of Handle Rotation | Applied for Guiding Device |
●Suitable for high speed mass feed. ●Not suitable for precise positioning.
| 17~20 mm | ● Dovetail | |
Feeding Screw
| ● Use precise threadscrew pitch to proceed simple precise moving. | 0.25~1 mm | ● Dovetail ● Crossed roller ●Linear ball bearing |
Micrometer Head | ● Precise Reading Unit: 0.01mm is suitable for precise tuning. | 0.5 mm | ●Dovetail ● Crossed roller ● Linear ball bearing |
● Divided into rough moving (general feeding) and slight moving (micro feeding) use. ● It’s a special feeding device and a bit costly. ● Differential motion structure for slightly transmission. | Coarse tuning:0.5 mm Fine tuning:0.025mm | ●Linear ball bearing ● Crossed roller |
Feeding Position |
|